FOR ALL ENQUIRIES AND INFORMATION, CONTACT MIKE FREER ON: +27 (0) 71 672 8423 MIKE@ZKE.CO.ZA
For a long life in a harsh operating environment, be sure to take proper care of your hydraulic breaker.
Excavator-mounted hydraulic breakers are an ideal attachment to help break rock, concrete, asphalt and other construction and aggregate materials. However, to achieve long-lasting attachment performance, routine maintenance needs to be top of mind.
A lack of routine maintenance can easily derail production, costing you valuable time, money, and potentially decreasing the attachment’s lifespan. By following these six tips, you can get optimal performance and life out of your heavy-duty hydraulic breaker.
Tip No. 1: Complete a visual inspection
Although it only takes a few minutes to visually inspect a hydraulic breaker for wear and tear, many operators overlook this step. A visual inspection should be completed each time the breaker will be used to help identify any worn or damaged components and prevent unexpected downtime.
Daily visual checks can give an early look at worn items that can lead to potential failures down the road. Check hydraulic hoses, the breaker shell, attachment pins, tool retainers and locks; and the tool point, for any cracks or gouges.
Tip No. 2: Use the correct maintenance tools
Before daily use, inspect the hydraulic breaker for wear and tear. Look for any worn or damaged components.
Many breaker manufacturers provide a specialized check tool to measure the breaker’s lower bushing, top angle of the breaker tool, and retaining pins. Using this maintenance tool for its recommended checks will decrease the likelihood of early component failure.
The first step to using the maintenance tool is removing the retainer pins and breaker tool. Once the breaker tool is removed, it is a good opportunity to give it an inspection for any cracks and use the maintenance tool to check the top angle. Also, check the retainer pins for wear and/or damage.
Next, check the breaker’s bushing. The maintenance tool is inserted into the bushing, and if it can be turned flat so that it fits end-to-end inside the bushing, the bushing needs to be replaced. This simple check takes approximately 15 to 30 minutes and should be conducted once a week or every 50 hours of attachment use.
Any wear on the bushing can affect tool performance and should not be overlooked. Bushing wear will allow front to back play in the breaker tool and can cause misalignment to the piston.
Tip No. 3: Examine hydraulic hoses
Hydraulic hoses from the excavator should be the correct length and always be routed properly to help decrease wear and potential downtime. Hoses that are short in length restrict attachment extension. On the flip side, hoses longer in length can catch or become disengaged on rebar and other debris.
Reputable breakers come with standard hydraulic hoses that are the correct length for each of their machines to make installation easy and maximize operating time and hose protection.
Excavator-mounted hydraulic breakers are an ideal attachment to help break rock, concrete, asphalt and other construction and aggregate materials. However, to achieve long-lasting attachment performance, routine maintenance needs to be top of mind.
A lack of routine maintenance can easily derail production, costing you valuable time, money, and potentially decreasing the attachment’s lifespan. By following these six tips, you can get optimal performance and life out of your heavy-duty hydraulic breaker.
Tip No. 1: Complete a visual inspection
Although it only takes a few minutes to visually inspect a hydraulic breaker for wear and tear, many operators overlook this step. A visual inspection should be completed each time the breaker will be used to help identify any worn or damaged components and prevent unexpected downtime.
Daily visual checks can give an early look at worn items that can lead to potential failures down the road. Check hydraulic hoses, the breaker shell, attachment pins, tool retainers and locks; and the tool point, for any cracks or gouges.
Tip No. 2: Use the correct maintenance tools
Before daily use, inspect the hydraulic breaker for wear and tear. Look for any worn or damaged components.
Many breaker manufacturers provide a specialized check tool to measure the breaker’s lower bushing, top angle of the breaker tool, and retaining pins. Using this maintenance tool for its recommended checks will decrease the likelihood of early component failure.
The first step to using the maintenance tool is removing the retainer pins and breaker tool. Once the breaker tool is removed, it is a good opportunity to give it an inspection for any cracks and use the maintenance tool to check the top angle. Also, check the retainer pins for wear and/or damage.
Next, check the breaker’s bushing. The maintenance tool is inserted into the bushing, and if it can be turned flat so that it fits end-to-end inside the bushing, the bushing needs to be replaced. This simple check takes approximately 15 to 30 minutes and should be conducted once a week or every 50 hours of attachment use.
Any wear on the bushing can affect tool performance and should not be overlooked. Bushing wear will allow front to back play in the breaker tool and can cause misalignment to the piston.
Tip No. 3: Examine hydraulic hoses
Hydraulic hoses from the excavator should be the correct length and always be routed properly to help decrease wear and potential downtime. Hoses that are short in length restrict attachment extension. On the flip side, hoses longer in length can catch or become disengaged on rebar and other debris.
Reputable breakers come with standard hydraulic hoses that are the correct length for each of their machines to make installation easy and maximize operating time and hose protection.
Tip No. 4: Grease the attachment
Greasing the hydraulic breaker is the most important maintenance item because it lubricates and clears the tool bushing area of debris. Use a No. 2 lithium-based grease with 3 percent moly rated to 500 degrees Fahrenheit to help prevent metal-on-metal contact. Compared to standard lubricants, the grease is made for higher temperatures and remains between the steel and bushings at higher temperatures, providing for better and longer-lasting lubrication.
Greasing can be done manually or via an automatic greasing system. If using a hydraulic breaker that needs to be manually greased, make sure to follow manufacturer recommendations — typically every 1 to 2 hours — to reduce buildup, tool wear, and bushing wear.
Some manufacturers feature an automatic lubrication (greasing) system for their hydraulic breaker models that delivers a constant flow of grease and eliminates manual greasing intervals. The lubrication system can be mounted on the breaker cradle directly, or a larger tank can be machine mounted. The automatic system can save labor-intensive time, money down the road, and help to avoid over-greasing the hydraulic breaker.
Tip No. 5: Use the right tool point
Matching the tool point to its respective application can significantly maximize jobsite production and extend the breaker’s life. Hydraulic breakers can be equipped with different points — the most common being the moil tool point. When breakers are ordered, they may come standard with a set of moil points that can be used for everyday demolition applications.
Other available tool points include: • Chisel tool point — provides more breaker control when a breaker is being used for general excavation or cutting concrete for trenching. • Blunt tool point — easily breaks and fractures large pieces of concrete or block in heavy construction applications. • Pyramidal tool point — used for breaking hard, abrasive material in demolition applications.
Greasing the hydraulic breaker is the most important maintenance item because it lubricates and clears the tool bushing area of debris. Use a No. 2 lithium-based grease with 3 percent moly rated to 500 degrees Fahrenheit to help prevent metal-on-metal contact. Compared to standard lubricants, the grease is made for higher temperatures and remains between the steel and bushings at higher temperatures, providing for better and longer-lasting lubrication.
Greasing can be done manually or via an automatic greasing system. If using a hydraulic breaker that needs to be manually greased, make sure to follow manufacturer recommendations — typically every 1 to 2 hours — to reduce buildup, tool wear, and bushing wear.
Some manufacturers feature an automatic lubrication (greasing) system for their hydraulic breaker models that delivers a constant flow of grease and eliminates manual greasing intervals. The lubrication system can be mounted on the breaker cradle directly, or a larger tank can be machine mounted. The automatic system can save labor-intensive time, money down the road, and help to avoid over-greasing the hydraulic breaker.
Tip No. 5: Use the right tool point
Matching the tool point to its respective application can significantly maximize jobsite production and extend the breaker’s life. Hydraulic breakers can be equipped with different points — the most common being the moil tool point. When breakers are ordered, they may come standard with a set of moil points that can be used for everyday demolition applications.
Other available tool points include: • Chisel tool point — provides more breaker control when a breaker is being used for general excavation or cutting concrete for trenching. • Blunt tool point — easily breaks and fractures large pieces of concrete or block in heavy construction applications. • Pyramidal tool point — used for breaking hard, abrasive material in demolition applications.
Tip No. 6: Inspect nitrogen pressure
Determining the proper nitrogen charge pressure depends on the application and outside working temperature.
The nitrogen level for breaking rock should be different than breaking concrete in a parking lot. The outside temperature also adds another variable. The attachment’s Operation and Maintenance Manual gives you the recommended nitrogen pressure setting for your application and working temperature.
By following these six hydraulic breaker maintenance tips, an operator can better utilize the attachment and help extend its life. Be sure to complete the recommended maintenance schedule for the hydraulic breaker. Catching any obvious concerns during a routine visual check can help reduce unnecessary downtime later on.
Work with your equipment dealer to ensure a good match between the hydraulic breaker and the carrier.
Right-size your breaker
Hydraulic breaker attachments are not universal across all carriers such as crawler excavators. Each breaker must be properly sized to a specific carrier’s performance to effectively break material. For instance, if a breaker is too large for the carrier, energy can be displaced and diminish the breaker’s impact on the material. Additionally, if the breaker is too small, it can put excessive pressure on the working steel and other mounting components, potentially causing damage.
Lee Smith, Doosan attachment product specialist, recommends working with a heavy equipment dealership to ensure the breaker will match the carrier’s weight, hydraulic oil flow and pressure, and will fit the desired breaker application.
Article courtesy of Doosan Infracore Construction Equipment America.
Contributed – August 23, 2017
Determining the proper nitrogen charge pressure depends on the application and outside working temperature.
The nitrogen level for breaking rock should be different than breaking concrete in a parking lot. The outside temperature also adds another variable. The attachment’s Operation and Maintenance Manual gives you the recommended nitrogen pressure setting for your application and working temperature.
By following these six hydraulic breaker maintenance tips, an operator can better utilize the attachment and help extend its life. Be sure to complete the recommended maintenance schedule for the hydraulic breaker. Catching any obvious concerns during a routine visual check can help reduce unnecessary downtime later on.
Work with your equipment dealer to ensure a good match between the hydraulic breaker and the carrier.
Right-size your breaker
Hydraulic breaker attachments are not universal across all carriers such as crawler excavators. Each breaker must be properly sized to a specific carrier’s performance to effectively break material. For instance, if a breaker is too large for the carrier, energy can be displaced and diminish the breaker’s impact on the material. Additionally, if the breaker is too small, it can put excessive pressure on the working steel and other mounting components, potentially causing damage.
Lee Smith, Doosan attachment product specialist, recommends working with a heavy equipment dealership to ensure the breaker will match the carrier’s weight, hydraulic oil flow and pressure, and will fit the desired breaker application.
Article courtesy of Doosan Infracore Construction Equipment America.
Contributed – August 23, 2017